Tuesday, December 11, 2012
Monday, December 10, 2012
Thursday, December 06, 2012
Friday, November 30, 2012
Thursday, November 29, 2012
20 mm router bits source
20 mm router bits source: 20mm in metric is essentially the same as 25/32 inches in dinosaur. �25/32 inch = 19.844 mm or essentially 20mm.
If you are willing to use a 1/2 inch shank bit, which is arguably stronger than 1/4 inch or 8mm, the first two sources of American-made router bits I checked have them, Eagle and Whiteside.
Eagle has this one:
Part No.:102-1275, diameter 25/32" carbide length 1-1/4" overall length = 3" shank: 1/2" $22.95
Whiteside has this one:
Part No: 1088, diameter 25/32" , carbide length 1 1/4" overall length 3" , shank 1/2", $17.12
If you are willing to use a 1/2 inch shank bit, which is arguably stronger than 1/4 inch or 8mm, the first two sources of American-made router bits I checked have them, Eagle and Whiteside.
Eagle has this one:
Part No.:102-1275, diameter 25/32" carbide length 1-1/4" overall length = 3" shank: 1/2" $22.95
Whiteside has this one:
Part No: 1088, diameter 25/32" , carbide length 1 1/4" overall length 3" , shank 1/2", $17.12
Tuesday, November 27, 2012
Monday, November 26, 2012
Saturday, November 24, 2012
Friday, November 16, 2012
Friday, October 19, 2012
Friday, October 12, 2012
Wednesday, October 10, 2012
Tuesday, September 25, 2012
Subscribe to:
Posts (Atom)